Spessimetri LASER serie LTM1000
Spessimetro laser per misure di spessore senza contatto
RODER presents LTM-1000 the new non-contact measuring systems for the measurement of thickness and width with LASER technology.
Used in all applications requiring an economical and easy to use system, LTM-1000 allows you to measure the thickness or width of continuous or discontinuous materials through laser light sources.
The measurement occurs without contact and allows for dimensional controls also on moving materials, easily deformable materials or non-measurable with the traditional techniques of measurement in contact.
The measurement can be directly displayed on the instrument and can be generated programmable alarm thresholds or analog signals proportional to the measurement.
Through a cable or a wireless connection acquisition you can transfer data to a remote data acquisition system or a giant display.
The system LTM-1000 can be connected to the software package DATASINK 100 for the automatic acquisition of measurements and alarms. DATASINK 100 can be supplied with the remote monitor display REDAM for the remote control of the process.
Use of LTM-1000
The LTM-1000 can be used on a single side of flat material. The material can be continuously or in plates. The measurement is displayed in a few tenths of a second and can be compared with two thresholds of tolerance. In this way is possible to check the material with the classification HIGH-GO-LOW
The LTM-1000 can be also used on the two sides of flat material. The material can be continuously or in plates. The measurement is displayed in a few tenths of a second and can be compared with two thresholds of tolerance. In this way is possible to check the material with the classification HIGH-GO-LOW. Connected to a data acquisition software is possible to generate graph and report with the data of both LASER thickness gauge synchronized.
Some real applications .....
|Modelli disponibili e dati tecnici|